FOETH’S TECHNICAL SERVICES

Since Foeth was founded in 1908 we have had a large workshop with an extensive team of professional process equipment technicians. All of our employees are skilled engineers who have great knowledge of and experience with the process equipment we have in stock and the equipment our customers will be utilizing on-site. Fully functioning systems that work properly and are in good condition not only keep your operators happy but also minimize maintenance costs. Purchasing reconditioned equipment has several benefits, like:

High profitability due to a readily available product and fast delivery.
Lower impact on your budget due to a significantly lower price compared to a newly fabricated one.
Reduced environmental impact. A refurbished machine (instead of a new one) means approximately 3,2 tons less carbon dioxide (CO2) emissions.

What services do we perform in our workshop?

Since Foeth was founded in 1908 we have had a large workshop with an extensive team of professional process equipment technicians.

At our 4,000 m² workshop we clean, mechanically test and, if needed, completely recondition (or in other terms: refurbish, revamp, etc.) process machinery. The degree to which a machine is reconditioning can vary widely depending on the state of the machine. All these activities are performed on process equipment for a broad range of industries, like the food, chemical, and pharmaceutical industry.

Our specialties are:

Mechanical refurbishment and rebuilds
Reverse engineering
OEM documentation and parts sourcing
Pressure testing
Spark testing
Spray painting
Cleaning
Shot blasting and bead blasting
Test running to establish mechanical integrity

Examples of our team’s past reconditioning jobs

Hosokawa Vrieco S 10 VB-S - Conical dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

see all conical dryers

https://a.storyblok.com/f/191010/700x440/21cae79beb/w365-na.jpg

https://a.storyblok.com/f/191010/700x440/3cbcd86bee/w365-voor.jpg

Ponndorf Kassel 402-S - Dewatering press

The Ponndorf dewatering press has completely been reconditioned. Some adjustments are; The replacement of the bearings and seals of the drive. All stainless steel parts are glass bead blasted and steel parts are spray painted.

see all dewatering presses

https://a.storyblok.com/f/191010/700x440/d32395abb6/n449-na.jpg

https://a.storyblok.com/f/191010/700x440/2b97696b23/n449-voor.jpg

AMK Aachen VIU-450 - Z-blade mixer

During this reconditioning process the bearings and seals of the drive have been replaced. A new shaft was also mounted in the gearbox. The mixing area has been burnt clean to remove residual product. All stainless steel parts are glass bead blasted and steel parts are spray painted.

see all Z-blade mixers

https://a.storyblok.com/f/191010/700x440/697d382c3b/n348-na.jpg

https://a.storyblok.com/f/191010/700x440/afe6404fb7/n348-voor.jpg

Loedige VT-1600/2 MZ - Paddle dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive and mixing shaft have been replaced, new wear sleeves were turned and the double jacket was renewed.

see all paddle dryers

https://a.storyblok.com/f/191010/700x440/2054f17f7c/c017-na.jpg

https://a.storyblok.com/f/191010/700x440/f32c7bd676/c017-voor.jpg

Loedige FKM-600 D - Powder turbo mixer

Complete overhaul / reconditioning where the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

see all powder turbo mixers

https://a.storyblok.com/f/191010/700x440/49f4fddcb3/g282-na.jpg

https://a.storyblok.com/f/191010/700x440/643ab655cd/g282-voor.jpg

Stord Bartz Ind TST-0,3 ROTADIS - Paddle dryer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray painted.

see all paddle dryers

Morton FKM-900D - Powder turbo mixer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray painted

see all powder turbo mixers

https://a.storyblok.com/f/191010/700x440/6c8c3bfee6/w505-na.jpg

https://a.storyblok.com/f/191010/700x440/e8f6751db7/w505-voor.jpg

Brogli MH-2000 - Processing vessel

In this reconditioning job our professional technicians replaced the bearings and seals of the drive and mixing shaft. All steel parts have been spray painted.

see all processing vessels