Восстановление технологических машин

Давайте переиспользуем для уменьшения

Устойчивость входит в ДНК Foeth. Мы покупаем и продаем подержанные машины. Таким образом, будет произведено меньше нового оборудования, и меньше машин придется утилизировать. Результат: меньше выбросов CO2. Это так просто.

Мы реконструируем и восстанавливаем производственные машины, чтобы раскрыть их истинный потенциал. Наши эксперты обладают большим опытом в распознавании качества и потенциала. Именно так мы формируем свой ассортимент. Каждая производственная машина полностью проверена и готова к повторному использованию. Так что вы можете полагаться на проверенное качество.

Примеры работ по восстановлению, выполненных нашей командой в прошлом

Hosokawa Vrieco S 10 VB-S - Conical dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all conical dryers

Ponndorf Kassel 402-S - Dewatering press

The Ponndorf dewatering press has completely been reconditioned. Some adjustments are; The replacement of the bearings and seals of the drive. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all dewatering presses

AMK Aachen VIU-450 - Z-blade mixer

During this reconditioning process the bearings and seals of the drive have been replaced. A new shaft was also mounted in the gearbox. The mixing area has been burnt clean to remove residual product. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all Z-blade mixers

Loedige FKM-600 D - Powder turbo mixer

Complete overhaul / reconditioning where the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all turbo mixers

Stord Bartz Ind TST-0,3 ROTADIS - Paddle dryer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all paddle dryers

Loedige VT-1600/2 MZ - Paddle dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive and mixing shaft have been replaced. New wear sleeves turned. Have the double jacket renewed.

See all paddle dryers

Morton FKM-900D - Powder turbo mixer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray-painted.

See all powder turbo mixers

Brogli MH-2000 - Processing vessel

In this reconditioning job, our professional technicians replaced the bearings and seals of the drive and mixing shaft. All steel parts have been spray-painted.

See all processing vessels