Regeneracja maszyn procesowych

Zredukujmy poprzez ponowne wykorzystanie

Foeth ma zrównoważony rozwój we krwi. Kupujemy i sprzedajemy używane maszyny. Dzięki temu produkcja nowego sprzętu jest mniejsza, a mniej maszyn trafia na złom. Wynik: mniejsze emisje CO2. To takie proste.

Przywracamy do życia i odnawiamy maszyny procesowe, aby odblokować ich prawdziwy potencjał. Nasi eksperci posiadają dużo doświadczenia w rozpoznawaniu jakości i potencjału. W ten sposób budujemy nasze zapasy. Każda pojedyncza maszyna procesowa jest w pełni sprawdzana i gotowa do ponownego użycia. Możesz więc polegać na sprawdzonej jakości.

Przykłady wcześniejszych prac regeneracyjnych naszego zespołu

Hosokawa Vrieco S 10 VB-S - Conical dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all conical dryers

Ponndorf Kassel 402-S - Dewatering press

The Ponndorf dewatering press has completely been reconditioned. Some adjustments are; The replacement of the bearings and seals of the drive. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all dewatering presses

AMK Aachen VIU-450 - Z-blade mixer

During this reconditioning process the bearings and seals of the drive have been replaced. A new shaft was also mounted in the gearbox. The mixing area has been burnt clean to remove residual product. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all Z-blade mixers

Loedige FKM-600 D - Powder turbo mixer

Complete overhaul / reconditioning where the bearings and seals of the drive have been replaced. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all turbo mixers

Stord Bartz Ind TST-0,3 ROTADIS - Paddle dryer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray painted.

See all paddle dryers

Loedige VT-1600/2 MZ - Paddle dryer

Complete overhaul / reconditioning in which, among other things, the bearings and seals of the drive and mixing shaft have been replaced. New wear sleeves turned. Have the double jacket renewed.

See all paddle dryers

Morton FKM-900D - Powder turbo mixer

Complete overhaul / reconditioning, including replacement of the bearings and seals of the drive and mixing shaft. All stainless steel parts are glass bead blasted and steel parts are spray-painted.

See all powder turbo mixers

Brogli MH-2000 - Processing vessel

In this reconditioning job, our professional technicians replaced the bearings and seals of the drive and mixing shaft. All steel parts have been spray-painted.

See all processing vessels