Foeth Stock background

Ribbon blenders

Efficient homogenisation of blended solids

The homogeneous mixing of bulk solids is one of the many vital operations in the pharmaceutical, chemical, food and feed industries. At Foeth, we have a large stock of used ribbon blenders for batch or continuous operation and in a wide range of capacities. These are processing equipment from well-known brands such as Hermann Linden, Dinnissen and Alpine, among others. Due to rigorous testing by our mechanics, the performance of all our machines is guaranteed. Read more about ribbon blenders

Check out the variety of ribbon blenders available from Foeth!

Show Filters
Ruberg Mischtechnik KG VM1500 - Ribbon blender

Ruberg Mischtechnik KG VM1500

Ribbon blender

In stock NL

283U516

Emde Nassau ESM-80 with dumping cabinet ST-100 - Ribbon blender

Emde Nassau ESM-80 with dumping cabinet ST-100

Ribbon blender

In stock NL

242U269

Ribbon blender

Ribbon blender

In stock NL

231U211

Bionaz 150 Ltr - Ribbon blender

Bionaz 150 Ltr

Ribbon blender

In stock NL

354T970

Ribbon blender

Ribbon blender

In stock NL

243P345

1000 Ltr - Ribbon blender

1000 Ltr

Ribbon blender

In stock NL

243P325

Alpine KM 20 - Ribbon blender

Alpine KM 20

Ribbon blender

In stock NL

171M709

Dinnissen - Ribbon blender

Dinnissen

Ribbon blender

In stock NL

033H111

Load moreLoad all
1
2
undefined

Premium quality

We only have machines from premium European manufacturers and mechanically test prior to shipment

undefined

2800+ machines

Foeth has the largest stock in Europe and we update our inventory on a weekly base.

undefined

Readily available

All our machines are available on our premises, ready to be tested and shipped to you!

Ribbon blenders: definition

Helical ribbon blenders are some of the most common mixing equipment, thanks to their versatility and cost-effectiveness. They consist of a stationary U-shaped vessel with a flat top cover and a product discharge point, usually located in the centre of the bottom of the channel.

The mixing shaft is horizontally oriented and rotates on outboard bearings, with radial arms, which support the helical ribbons. The mixer forces the ribbons through the stationary solid material to promote particle dispersion and achieve homogeneous mixtures in very short times.

Although designed for solid-solid processing, they can receive low or high percentages of liquids that are atomised during the processing to produce smooth pastes or slurries.

When purchasing a ribbon blender, one of the factors to consider is the density of the product, the expected mixing volume and the moisture content. The batch volume defines the capacity of the mixer and the bulk density of the mixture, the power required in the motor, so that it generates enough force to move the propellers during the processing.

How does the helical ribbon blender work?

In ribbon blenders, the powder or granular product flows freely inside the vessel. The machine employs an agitator consisting of inner and outer helical ribbons, which force the material to flow in an axial and radial flow pattern at the same time. The outer ribbon moves the material in one direction, while the inner ribbon moves the material in the opposite direction, achieving a high degree of diffusion mixing.

For optimum mixing, helical ribbon blenders require 30 to 80% of the nominal volumetric capacity of the vessel, although these percentages may vary for a particular model. When working with lower volumes, the mixer may not generate adequate contact between the propellers and the mixture.

If you need additional information about our products or require equipment for a specific application, please call or message us via the Foeth contact form.

Get the ribbon blender for your process at Foeth!

Looking for something special?

If we do not have your desired process equipment in stock, please let us know! Our purchase team will try to find the best matching machine for you via their international purchase network.