Hosokawa Micron DMR-2H FLASH-DROGER - Drying system

Prubežná sušicka

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 3

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 4

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 5

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 6

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 7

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 8

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 9

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 10

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 11

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 12

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 13

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 14

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 15

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 16

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 17

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 18

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 19

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 20

Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka - image 21

Tento stroj je prodán

Hledáte produkt se stejnými specifikacemi?

Tento Hosokawa Micron DMR-2H FLASH-DROGER - Drying system - Prubežná sušicka je prodán. Ale poskytněte své údaje a informujeme vás, až bude dostupný srovnatelný produkt.

General
SKU305U633
UmístěníSold
UdělatHosokawa Micron
TypDMR-2H
Pressure
Pracovní tlak0.2 bar
Hlavní rysy
MateriálNerezová ocel
Výstupní výška1030 mm
Specifikované Vlastnosti - Prubežná sušicka
Průběžná sušičkacheck
Výška podavače1479 mm
Výška výstupu1030 mm
Motorsifter: 11 kW (Ex) 4000 rpm; disperser: 22 kW (Ex) 3700 rpm
Maximální dovolená teplotasifter: 135 °C; disperser: 260 °C
MateriálNerezová ocel 1.4571 (316Ti), Nerezová ocel 1.4581 (348)
Informace
Rok výstavby2004
Namontováno na rámu z uhlíkové ocelicheck
S rozváděčemcheck (as is)
Podlaha1,7x1,2 m
Celková výška3,0 m
Hmotnostca. 1500 kg
CEcheck
Číslo4164203100
Vyhovují směrnici ATEXcheck
Zvláštní specifikace

Další informace

Technical Data:

- Metering Screw: Inlet: 400x500, Volume: ±60 Ltr., Capacity: ±500 Ltr./h, Speed: 5-6 rpm, Motor: 1.5 kW, 230/400 Volt, 1420 rpm.

- Electrical heater: ELMES, Type: HG/SE-80-T120, Volume: 150 Ltr., Max. Pressure: 0.5 bar, Test Pressure: 0.9 bar, Max. Temperature: -10/350 °C, with Thermal Unit

- Rotating Valve: DMN, Motor: 0.75 kW (Ex), 24 rpm

- Hydraulic Unit: Motor: 0.75 kW (Ex)

- Heat Exchanger: GEA, Type: 12-900/485 121-V8 18x1-24x24-D8, Max. Pressure: 17 bar, Test Pressure: 28.9 bar, Max. Temperature: 220 °C, Volume: 30 Ltr.

- Filter: Filtertec, type: DSR2.4/41/40TR 63637 (Ex); allowable operating pressure: ± 250 mbar, allowable operating temperature: max. 135 °C

The Drymeister (DMR) flash drying system is the first of its kind to be patented anywhere in the world. It was designed to combine drying, de-agglomeration / milling and classifying in one piece of equipment. The DMR flash dryer can dry temperature-sensitive products, safely, even under increased temperatures, in a matter of seconds!

The DMR is a continuous dryer, capable of processing bulk solids with a moisture content varying from a few % to more than 80% in suspensions, slurries, pastes, filter cakes and wet powders. It requires 75% less space and uses about 30-40% less energy per kilogram of evaporated water, compared to other direct drying technologies.